Pullers & Separators – November 2021 edition

Looking for the best Pullers & Separators?

We did 20 hours of research, tested 6 Pullers & Separators, to create this comparison. We believe the best Pullers & Separators doesn’t have to be the most sophisticated to be great. Our first pick is a great example, it delivers on its promises. It also costs less than many other products we tested. Many different criteria were used to give more value and precision to this comparison. Discover now our comparison of the best Pullers & Separators.

TOP 10

No. 1
Mini Bearing Separator Set gear puller splitter
  • Bearing Separator and 2 Leg Puller
  • Suitable for removing small gears
  • wheels and shaft fittings.
  • Separator : 15 - 58mm Puller Jaw : 50mm
No. 2
5 Ton Hydraulic Bearing Puller 3 Jaws Hub Separator Bearing Puller Tool Car Claw Puller Pole Clamp and Wiper Arm Puller for Traction Hubs, Flanges, Gears and Bearings
1 Reviews
5 Ton Hydraulic Bearing Puller 3 Jaws Hub Separator Bearing Puller Tool Car Claw Puller Pole Clamp and Wiper Arm Puller for Traction Hubs, Flanges, Gears and Bearings
  • 【3 Adjustable Pulling Claws】 It is equipped with 3 pulling claws that can be adjusted from high to low and can be pulled with two or three legs as required.3 jaws or 2 jaws can be interchangeable and adjusted from high to low point
  • 【With One handle】 With one handle it can be opened, which can be operated with very little operation and receives a large pulling force. The control switch for the safety overflow valve on the pump body is ready to avoid overloading the oil pressure
  • 【Easy to Use】 The hydraulic puller takes on the design of a 360-degree pump head that is easy to use and operate. It able to exchange 2 or 3 jaws freely for different use. After turning, it can quickly contact the work center according to the distance between the puller and the position center
  • 【High Quality Material】 This hydraulic puller is made of forged steel and is very strong and durable, with good load capacity and long life. Suitable for traction hubs, flanges, gears and bearings with a maximum load capacity of 5 tonnes
  • 【Complete Set】 The set include: 1 x hydraulic puller, 1 x handle, 1 x 2/3 leg puller yoke, 3 x baking, 6 x screws and nuts, 6 x connecting plates, 1 x nose adapter, 1 x carry bag. The tote bag adapted to the tool brings infinite convenience, whether it is storing or maintaining tools or carrying it when going out
No. 3
US PRO 12 Ton Hydraulic Replacement Ram Bearing Separator Puller Tool Unit 6030
  • 12 Ton Hydraulic Replacement Ram Bearing Separator Puller Tool Unit
No. 4
GOGOLO 5PCS Front End Service Tool Set Pitman Arm Ball Joint Separator Tie Rod End Puller Removal Tool Kit
  • [DESIGNED] The front end service tool is designed for easy separation pull removal of ball joint, front tie rod ends and pitman arm on most popular car models. It is perfect for professional mechanics.
  • [APPLICATION] 5 kind of ball joint removal tools fit to most light cars, mid-size cars and light pickup trucks, but probably unfit for most full-size cars, mid-size and full-size pickup trucks.
  • [HIGH QUALITY] The ball joint seperator are made of high strength steel and those screws have been heat treated, can make more durable.
  • [CONVENIENT STORAGE] Conveniently organized in a compact carry case, it cleans up easy and keeps your adapters and thrust bolts organized. Safe storage and easy to transport.
  • [Efficient Service] GOGOLO provides free after-sales service to our customers. If our products have any quality problems, please feel free to contact our customers for help, replacement parts and refunds.
No. 5
12pcs 5 ton Capacity Bearing Separator Puller Set 2" and 3" Splitters Remove Bearings Kit
  • Practical: Use the Bearing Separator Set, 5-Ton Capacity – Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit when you need to separate bearings on your vehicle, ATV, snowmobile, and more
  • Versatile: For a wide variety of pulling jobs; Can remove bearings from a shaft, split bearings, and separate flywheels; Up to 5-Ton (4.5 MT) capacity; Can be used separately or with other pullers or tools
  • Durable: Each piece in this set is drop forged and heat treated for extra strength and longevity; Black oxide finish for corrosion resistance
  • Easy Storage: Heavy-duty 15” x 9.7” x 2” (38cm x 24.6cm x 5cm) blow-mold case with handle and latches for secure storage, easy transportation, and organization
  • Contents: 12-piece package includes 4-piece 4” (10cm) and 4-piece 5” (12.7cm) hex push-puller legs, 1-piece 2” (5cm) and 1-piece 3” (7.6cm) bearing separator jaws or splitters, 1-piece 5” (12.7) puller cross bar with 1-piece 6-1/4” (15.9cm) forcing screw
No. 6
NMAZA 10Ton Hydraulic Gear Puller Wheel Bearing Pulling Separator 3 in 1 Pump Oil Tube Drawing Machine M/Case
  • POWERFUL TOOL : This Hydraulic Gear Puller has 10 Ton Max Capacity and 2 "(50mm) Ares Travel with spread10 " ( 250mm) which can meet your working requirements
  • 3 IN 1 DESIGN :This Wheel Bearing Pulling Separator integrates pumps, oil tube and drawing machine. Its forged steel 2 way yoke allows twin or triple leg pulls, the 3 jaw types can be adjusted from high to low point. Pump head can be turned by 360 for flexibility
  • COMPACT & LIGHTWEIGHT : The integral puller is compact and lightweight, Packed in blow mould carrying case, easy for you to transport or storage
  • EASY TO USE Easy to carry and operate, portable structure is easy for carrying and operation
  • WIDE APPLICATION : This great Wheel Bearing Hub Removal Tool has wide appication, which is suitable for pulling hubs flanges, gears and bearings
SaleNo. 7
VEVOR 15 Ton Hydraulic Puller,Hydraulic Gear Puller Bearing Hub Separator 2 or 3 Jaws Gear Puller Kit 100-300 mm Hydraulic Gear/Bearing/Wheel Bearing Puller Separator
  • Max Capacity: 15T. Ares Travel: 2"(50 mm).
  • Min/Max Reach: 0-7"(0-180 mm). Min/Max Spread: 4"-12"(100-300 mm).
  • Suitable for pulling / splitting hubs, flanges, gears and bearings etc.
  • Move the handle while operation, piston actuating lever moves forward smoothly and steadily under the effect of oil pressure. Jaws move backward relatively to pull things out.
  • 3 in 1--integrates pumps, oil tube and drawing machine, able to exchange 2 or 3 jaws freely for different use. Pump head can be turned by 360° for flexibility.
No. 8
Gear / Hub Puller Bearing Separator Internal External 2 And 3 Legged 3" 4" 6" 8"
  • 2 and 3 Leg Configuration
  • Leg Sizes: 3, 4, 6 & 8"
  • Leg Sizes: 75, 100, 150 & 200mm
  • Forged steel yoke and arms
  • Supplied in blow moulded case
No. 9
BALLSHOP Ball Joint Puller Separator Tie Rod End Extractor Remover Splitter Tool Set Opening Size 22mm Car Tie Rod End Puller Ball Head Extractor Tool for Most Cars and Light Trucks
  • [High-Quality Material]: Using high-quality high-carbon steel material, high hardness, and long service life. Using this ball and socket joint tool, you can easily and safely fix it on the ball and socket joint without causing damage.
  • [Easy to Use]: Sophisticated design, lightweight, small size, and easy to carry. The ball and socket connector with a large pull range can be continuously adjusted in a simple way. Small size, easy to carry and use.
  • [Scope of Application]: With these tools, no more using a fork and air hammer to separate ball joints anymore. This set of tools is suitable for all common types of vehicles.
  • [Package Includes]: 1 ball joint puller separator and a tie rod end extractor remover.For removing ball joint pivots attached to the steering arm, stub axle, tie rod, and stabilizer.
  • [Suitable for]: This heavy-duty tool ball joint puller is ideal for squeezing out ball studs, disassembling ball joints, or squeezing out track rod ends. Indispensable work simplification.
No. 10
DAYUAN Ball Joint Puller Separator + Tie Rod End Extractor Remover Splitter Tool Set
  • Quality product for workshops, tradespeople and DIYers
  • For extracting the ball joints on tie rods and stabilizers
  • 18 mm opening and 20 mm opening

Intro

Find out where you can get the best Pullers & Separators! Making your choice among different Pullers & Separators on the market is not always easy. It can also turn into a daunting task because of the many websites offering the same type of product. On this page, we will give you a comparison to get the best value for your money. This complete ranking provides you with a comprehensive view and allows you to pick the best Pullers & Separators. You will find a broad selection of models, brands, and prices. Whether you want to save money or find out what is the best Pullers & Separators for you, our comparison will help you make the right choice. To keep things practical and easy to understand, we created a Top 10 of the best Pullers & Separators. You won’t have to choose your products at random anymore.. On your marks! Compare! Pick your Pullers & Separators!

Our Picks

No. 1
Mini Bearing Separator Set gear puller splitter
  • Bearing Separator and 2 Leg Puller
  • Suitable for removing small gears
  • wheels and shaft fittings.
  • Separator : 15 - 58mm Puller Jaw : 50mm
No. 2
5 Ton Hydraulic Bearing Puller 3 Jaws Hub Separator Bearing Puller Tool Car Claw Puller Pole Clamp and Wiper Arm Puller for Traction Hubs, Flanges, Gears and Bearings
1 Reviews
5 Ton Hydraulic Bearing Puller 3 Jaws Hub Separator Bearing Puller Tool Car Claw Puller Pole Clamp and Wiper Arm Puller for Traction Hubs, Flanges, Gears and Bearings
  • 【3 Adjustable Pulling Claws】 It is equipped with 3 pulling claws that can be adjusted from high to low and can be pulled with two or three legs as required.3 jaws or 2 jaws can be interchangeable and adjusted from high to low point
  • 【With One handle】 With one handle it can be opened, which can be operated with very little operation and receives a large pulling force. The control switch for the safety overflow valve on the pump body is ready to avoid overloading the oil pressure
  • 【Easy to Use】 The hydraulic puller takes on the design of a 360-degree pump head that is easy to use and operate. It able to exchange 2 or 3 jaws freely for different use. After turning, it can quickly contact the work center according to the distance between the puller and the position center
  • 【High Quality Material】 This hydraulic puller is made of forged steel and is very strong and durable, with good load capacity and long life. Suitable for traction hubs, flanges, gears and bearings with a maximum load capacity of 5 tonnes
  • 【Complete Set】 The set include: 1 x hydraulic puller, 1 x handle, 1 x 2/3 leg puller yoke, 3 x baking, 6 x screws and nuts, 6 x connecting plates, 1 x nose adapter, 1 x carry bag. The tote bag adapted to the tool brings infinite convenience, whether it is storing or maintaining tools or carrying it when going out
No. 3
US PRO 12 Ton Hydraulic Replacement Ram Bearing Separator Puller Tool Unit 6030
  • 12 Ton Hydraulic Replacement Ram Bearing Separator Puller Tool Unit

Why you should trust us?

This guide is the result of more than 10 years of experience in researching, testing, and writing about various subject. Our team members are experts in their fields. We spent 6 hours reading all the articles we could find online and all the customer reviews on various retail websites such as Amazon, Ebay, Alibaba or Flipkart. We also found many websites that provided valuable resources such as purchasing guides and detailed information on Pullers & Separators.

How we conduct our tests?

To help you make the best choice among the hundreds of products available, we decided to offer you a comparison of the Pullers & Separators in order to find the best value for your money. We searched different fields to find the best Pullers & Separators. We also looked at the best alternatives for reasonably priced and easy to use products. After we determined our main parameters, we conducted our research and tests.These parameters separate a great product from an average one:

  • Price
  • Ease of use
  • Customer reviews
  • Options
  • Quality
  • Durability

Special Offers

SaleNo. 1
Silverline MS23 Gear Puller Set 3pce 75, 100 and 150 mm
  • Drop forged and chrome plated
  • Reversible for internal and external use
SaleNo. 2
3 Pieces. Set Tie Rod End Remover I Universal Ball Joint Separator Removal I Ball Joint Puller |Car Garage Tools
  • 3 Pieces Haskyy Set Tie rod end Remover ✔ Universal puller - ball joint remover pin on tie rods, stabilizers, support joints, coupling rod, steering arm and steering knuckle
  • ✔ A = jaw opening 22-18 mm ✔ Drive via SW21 ✔ fine thread M16x1.5mm ✔ clamping range adjustable in two positions up to 25 & 55mm
  • ✔ B=mouth opening 19.5 mm ✔ Clamping range 20-50mm ✔ Drive via SW19 ✔stufenlose Adjustment
  • ✔ C=mouth opening 19 mm ✔ mouth depth 22 mm ✔ width: 40 mm ✔Antrieb via SW19 ✔ thread M12x1,75
  • ✔ 2 Year Haskyy Warranty ✔ 30 Day Money Back Warranty ✔ Haskyy Branded Products
SaleNo. 3
Neilsen CT1785 Battery Terminal and Wiper Arm Puller, Black
  • neilsen battery terminal and wiper arm puller
  • Fits most terminal posts
  • Also suitable for windscreen wiper arms and some alternator bearings
  • Item Package Dimension: 13.4 cm L x 19.0 cm W x 3.2 cm H

Conclusion

We hope this ranking was helpful to you in choosing the Pullers & Separators that best suits you. We made it thoroughly and we will update it regularly, so that you get a real-time comparison. Our goal is to allow you to compare models and prices, to get an overview of what the market has to offer. We are here to make it easier for you and to make informed decisions. If our ranking gave you a clearer view on the different Pullers & Separators available, feel free to let us know in the comments section. We will happily read them.

Our Score
Click to rate this post!
[Total: 0 Average: 0]

Last update on 2021-11-30 at 00:03 / Affiliate links / Images from Amazon Product Advertising API